The following 3 phase voltages are available: 50 Hz
Other voltages are
available on request.
heavy duty industrial diesel engine.
governing standard on all B.═ C . N and K series engines at 1500 /1800rpm.
24V system with battery charging alternator, axial type
starter motor, high capacity maintenance free lead acid starting batteries,
battery rack mounted on the generator set baseframe and heavy duty
interconnecting cables with terminations.
Engine Filtration System
Sealed paper mesh type dry air filters. Cartridge type
fuel fillers and full flow lube oil filters. All filters have replaceable
alternators have been carefully selected to match the overload performance of
the engine and incorporate the following: Screen protected and drip proof, self
exciting, self regulating brushless alternator with fully interconnected damper
windings, IC06 cooling system and sealed for life bearings. PMG fitted as
standard on BCP 1000 models and above. Other brand alternator are available on
system is Class H.
windings are impregnated in either triple dip thermo-setting moisture, oil and
acid resisting polyester or vacuum impregnated with a special polyester resin.
Heavy coat of anti-tracking varnish for additional protection against moisture
design in accordance with BS5000-3,VDE0530,NEMA MG1-22/32,lEC34,CSAC22.2-100,
and AS 1359
The fully sealed automatic voltage regulator maintains the
voltage within the limits of ╠ 0.5% (╠1% on HC15 frame) from no load to full
load including cold to hot variations at any power factor between 0.8 lagging
and unity and inclusive of a speed variation of 4.0%. Nominal adjustment is by
means of a trimmer incorporated in the AVR.
Suppression is in line
with the provisions of VDE Class G.
mounted, control panel of fabricated steel construction with a hinged lockable
door. The control panel is isolated from vibration and comprises of the
following instrumentation and controls: Oil pressure gauge, water temperature
gauge, battery charge ammeter, voltmeter and selector switch, frequency meter and hours counter. A manual start control module
and emergency stop button are fitted as standard.
Shutdown Protection Devices with
High coolant temperature.
low oil pressure and over speed.
feed and return lines are fitted between the engine terminated at a bulkhead on
the generator baseframe.
Radiator and cooling fan complete with protection guards, designed to
cool the engine
at specified output, in air-on temperatures up to 45╟C(113'F ) Coolant drain
valve and remote filling facility and site gauge are fitted as standard.
The complete generator set is mounted as a whole on a
heavy duty fabricated, welded steel baseframe. The baseframe incorporates
specially designed lifting eyes for sling operation. 8h running hour
capacity fuel base tank is available.
engine and alternator are directly coupled by means of an SAE flange so that
there is no possibility of misalignment after prolonged use. The engine
flywheel is flexibly coupled to the alternator and a full torsional analysis
has been carried out to guarantee no harmful
vibration will occur in the assembly.
mounts are supplied pre fitted between the engine/alternator combination and
the baseframe for generators upto and including BCP880S. AVM'S will be supplied loose for site installation
between the baseframe and floor on all other generator combinations.
The fan, fan drive and battery charging alternator drive arc
fully guarded for personnel protection. A
stone guard protects the radiator core from accidental damage.
The generator set is designed and constructed for installation in a
Various types of weatherproof and sound attenuated ISO container-sare
full set of operation and maintenance manuals and circuit wiring diagrams are
supplied with each generating set.
The generator set is load tested before dispatch. All
protective devices, control functions are simulated and the generator and its systems
checked, proved and then passed for despatch. A test certificate is provided as
Primer on all equipment.
Final coat to manufactures standard.
equipment meets the following standards: ISO3046, IEC34-1, IS08528, AS 1359,
All equipment is guaranteed for a period of 12 months
from date of commissio-ing or lOOOh running hour whichever occurs
SDEC Warranty Statement for a full specification of terms. Extended warranty
terms are available, for details please contact your local SDEC dealer.
Equipment must only be used in accordance with
recommended operating practices and subject to any specified load